Premium Concrete Sealer for Granite, Stone & Marble Outdoor

Stoneprotect SP5000 offers advanced 2-phase depth technology, ensuring long-lasting cleanliness and durability, making it the superior solution for preserving and protecting your driveway, concrete, patio, and pavers. This unique 2-phase depth technology penetrates deep into the stone's capillaries, creating a protective structure that prevents water and dirt from embedding into the stone, resulting in a surface that stays cleaner longer and is easier to maintain.

By minimizing dirt penetration, Stoneprotect SP5000 significantly reduces the need for time-consuming and expensive constant pressure washing. The yield of Stoneprotect stone sealing naturally depends on the type of stone to be treated, with absorbency, nature of the stone, and surface structure all playing a role. Practical experience shows that one liter of Stoneprotect SP5000 covers approximately 80 to 120 sq ft (10 to 12 sq m) of concrete stone.

You can reseal a surface already sealed with SP5000 at any time if the visible effect on the surface wears off. The sealant inside the stone will still be fully effective, even if the visible lotus effect is no longer recognizable. Reapplying on the surface will regain the visible effect if desired or needed. Stones will keep their high-quality looks longer, and the surface will be water-repellent, preventing dirt from penetrating into the stones. Moisture penetration is reduced, and cleaning is made easier.

Stoneprotect SP5000 can be applied on top of an existing sealer, but if the stones have been treated with third-party products, these must first be completely removed. The unique nanotechnology in Stoneprotect SP5000 produces the well-known lotus effect, making it easier to remove dirt from the stone surface. The sealant can also be applied to open-pored, absorbent, unsealed facade surfaces, such as plaster facades.

Stoneprotect SP5000 is a stone and concrete sealer, not an algaecide, so it does not remove green deposits, moss, or algae from the stone. Before applying SP5000, you can treat concrete and stones with a suitable anti-green, anti-algae product and then apply SP5000 on top of that.

To apply Stoneprotect SP5000, the surfaces must be free of old sealants, grease, dust, and dirt, and the cleaned surface must be thoroughly dried. The material can be applied by roller, brush, or sprayer, and it will soak deep into the surface. Depending on the absorbency of the material, it can be applied wet-on-wet to strengthen the effects. After successful application, let the surface dry, usually within 30-45 minutes at an ambient temperature of about 60°F (15°C).

Stoneprotect SP5000 is recommended by leading nano-experts for its unique technology, which strengthens the resistance to external impact on surfaces without reducing the stone's ability to breathe. The sealer can be reapplied easily, unlike conventional concrete sealers and coatings, which often require the old layer to be laboriously removed first.

product information: